【Features】This paste product is used to inspect the contact surfaces of gears, large valves, and machine tool beds, and mold alignment. Does not contain lead compounds making it safe for the accurate testing of contact points.【How to use】Paste: Take out a small amount from the container and spread it lightly with a sponge or a wet cloth at the spot where you want to check contact.Spray: Spray from a distance of about 20 cm from the object to be inspected and spread thinly.ProcedureDescriptionStir the developer sufficiently and apply it thinly and uniformly.Development time is usually 10 to 30 minutes.Inspect the flaw pattern.Coating area(approximate)Use a cleaning liquid or the like to remove grease, dirt, etc. from the surface to expose the flaw, and then dry it thoroughly.Packing unitDevelopingInspectionProduct NameProduct NameAppearanceRed-colored lubricant for alignment and contact inspection containing solid lubricant.This is a spray version of the above Red Touch Paste with excellent workability.Blue version of Red Touch Paste suitable for contact surfaces where red is difficult to see.PretreatmentOrder CodeKCC-SKCC-18Product NameOrder No.Characteristics/ApplicationPenetration Removal/washing Characteristics/ApplicationsEfficiently cleans dirt, oil, and grease on the section being inspected and residual penetrant on the surface.Quickly penetrates and dyes minute defects in the section being inspected.Makes the penetrant that permeated the flaws visible.Characteristics/ApplicationsDetailed stepsare available onYouTubeDetailed stepsare available onYouTubePacking unitDetailed stepsare available onYouTubePacking unit480ml×6×418L480ml×6×4480ml×6×4360mL×6×4RedRedBlue【Features】It is a flaw detection dye penetrant for quickly locating minute defects on the surfaces of materials and parts.It can be used in a wide range of fields such as rolled materials, castings, forgings, welds, plastics, porcelain, and ceramics.KCP-SKCD-SRed Touch PasteRed Touch SprayBlue Touch PasteKizu-Check Cleaner SprayKizu-Check Cleaner LiquidKizu-Check Penetrant SprayKizu-Check Developer Spray【Features】It is easy to detect gas and air leaks with a simple application of the product, and even the smallest of leaks can be checked.Since the main component is water, it is non-flammable and can be used on plastic, rubber, and painted surfaces.【Applications】Air leak detection in air brake hoses of automobiles.Gas leak detection at welds and joints of various gas pipes and equipment.Detection of refrigerant leak in piping of air conditioners and compressors, and piping joints of refrigerators.【How to use】Shake well before use and spray about 20 cm away from the area to be inspected.The area where bubbles appear is the leak location.Gas Leak Detection SprayNIC007Gas Leak Detection Spray200g×12225ml×6×4200g×12Approx.13.7m2/canApprox.4.6m2/can1234Apply the penetrant. Penetration time is usually 5 to 60 minutes. However, if the temperature is low, it will take longer.Remove the penetrant on the surface with a wet cloth containing cleaning liquid. For water washable types, rinse with a shower of water.■Lubricant for alignment and contact inspection■Flaw Detection Dye Penetrant “Flaw Check”■NIC007 Gas Leak Detection Spray34Chemical products for machine inspection
元のページ ../index.html#35