Flash pointPour pointBase materialFlash pointPour pointFlash pointPour pointSynthetic oilMolybdenumdisulfide (MoS2)PGL OilSynthetic oilMolybdenumdisulfide (MoS2)PGH OilHTC Oil #50AHTC Oil S150ASynthetic oilOilMolybdenum disulfide (MoS2)At room temperatureMechanism of lubrication by PGL/PGH oil#90220Gear Oil320#140460Synthetic oilMolybdenumdisulfide (MoS2)LTO-80 OilSynthetic oilSpecial polymerJK OilJC OilKinematicviscosity (40˚C)Viscosity indexKinematicviscosity (40˚C)Viscosity indexKinematicviscosity (40˚C)Viscosity indexCharacteristics/ApplicationsCharacteristics/ApplicationsCharacteristics/ApplicationsAppearanceAppearance317.8mm2/s95AppearanceThese are oils for high temperature application formulated by adding molybdenum disulfide (MoS2) to high-performance synthetic oil.There is very little residue even after long service, and above 200ºC, the product transitions to dry lubrication.It is ideal for conveyor chains of drying ovens.PGL: Low viscosity type, PGH: High viscosity typeThis is a non-black oil for high temperature applications containing a highly balanced blend of synthetic oil and mineral oil.The low amount of evaporation enables lubrication in a wet state even in high temperature areas.Highest grade oil for high temperature applications with excellent stability at high temperatures.Change in viscosity, residue produced, and evaporation at high temperatures are low, which extends lubricating intervals and reduces oil consumption.This is a gear oil containing a good balance of fine molybdenum disulfide (MoS2) particles.It has excellent extreme-pressure properties and is effective for preventing seizure and abnormal wear.Can be used for various large machines, large vehicles, rotary kilns, hoisting machines, and reducers working under high loads.This is a gear oil for ultracold regions formulated by adding molybdenum disulfide (MoS2) to high-performance synthetic oil.It can be used for reducers for large construction machinery and other equipment used in cold regions.This is a special high-viscosity oil for chains.Since it has excellent adhesion and does not drip easily, it is ideal for lubricating chains of various conveyors, multi-story parking lots, and amusement equipment.This product is made by diluting the above JK Oil with solvent to improve permeability.After application, it quickly penetrates between pin and bush, and then the solvent evaporates, providing excellent lubrication. Grayishblack120mm2/s212 Grayishblack330mm2/s227Mineral oilSynthetic oilLightyellow330.5mm2/s95Lightyellow135.4mm2/s111The oil evaporatesAt high temperature151.9mm2/s110223mm2/s91Mineral oilMolybdenumdisulfide (MoS2) Grayishblack394.4mm2/s107459mm2/s102 Grayishblack67.8mm2/s142Lightyellow420.8mm2/s94Clear andcolorlessProduct nameMain ingredientsBase materialProduct nameMain ingredientsProduct nameMain ingredientsSynthetic oilPetroleum solventPack SizePack SizePack Size4L×418L4L×418L4L×418L1L×64L×418L18L18L4L×418L220˚C-30.0˚C260˚C-25.0˚C286˚C-12.5˚C304˚C-32.5˚CWhen PGL oil and PGH oil are subjected to high temperatures of over 200°C, even after the oil evaporates, molybdenum disulfide (MoS2) remains on the surface of the base material and provides dry lubrication.210˚C-17.5˚C210˚C-15.0˚C208˚C-12.5˚C218˚C-10.0˚C210˚C-10.0˚C210˚C-47.5˚C185˚C-15˚Cbelow-20℃Less than-40°C19Oils for high temperature applicationsGeneral-purpose oils may cause sticking or residue in blast furnaces or drying ovens where temperature gets extremely high and may not be able to fulfill their purpose. NICHIMOLY’s oils for high-temperature applications contain a high concentration of molybdenum disulfide (MoS2) with a highly balanced blend of synthetic and mineral oils, achieving minimal deterioration under severe conditions and thereby contributing to extending the life of various machines. Gear oilHigh viscosity chain oilsOil
元のページ ../index.html#20